1. Welcome to the Scene Safety Simulator.  Your goal is to locate the victim ~inside the simulator as quickly and as safely as possible.  However, there ~are many hazards within the simulator, so don’t become a victim yourself. ~~If you have not experienced this type of 3D environment before, you must ~first get used to moving around.~~There are 2 ways to navigate the scene survey simulator. The easy way~is to hold down the right mouse button. The rescuer will walk towards the ~green GO arrow while the button is held down until he walks into an obstacle ~or a hazard.~~ Alternatively you may use the arrow keys. Press the Up arrow key to move ~forward, the Down arrow key to move backwards, the Left Arrow key to turn ~left, and the right arrow key to turn right.  The Page Up and Page Down ~Buttons allow you to look up and down.~~Clicking certain objects within the room (mainly the light switches) ~will open or activate them.  When you find a hazard, you will need to ~neutralize it by inactivating or identifying it. This is done by dragging an icon ~from the left panel and placing it on the hazard.~~Press s to turn sound on and off.#
2. Good the door is open.  Use the arrow keys to walk up the steps and enter ~the scene survey simulator.  Enter the room, but don’t go in too far, as it is ~very dark and there are hazards waiting for you.  ~~Use the Left or Right arrows to turn around. Can you find the light switch?  ~When you do, press on it with your left mouse button.  With the light on you ~will be able to see 2 hazards which will need your attention.  There is a 3rd ~hazard that you must prevent before proceeding too far.#
3. Well done.  You have successfully climbed the stairs and entered the ~simulator.  If you have not turned on the lights, this would be a good time to ~do so. Watch out for the door accidentally closing.  This is a hazard, as not ~only may poisonous gases or fumes may build up within the room, but you ~no longer have a clear and easy escape.  Also other rescuers and ~bystanders may not be able to communicate with or see you. ~~To keep the door open, you will need to chock it open with the bin. Position ~yourself slightly away from the door  and look down (page down button) so ~that you can see the bottom of the door. Drag the bin icon from the left panel, ~near the bottom of the open door (over the grey square mat just inside the ~door).  The bin should then appear  in front of the door and prevent it from ~closing. #
4. Excellent.  You have found the light switched and turned it on.  You have ~chocked the door open with the bin so it can’t swing shut.  Before you ~continue too much further, you need to ensure that two nearby hazards are ~identified, using the appropriate icons from the panel on the right.  Proceed ~with caution.#
5. Good.  With the light on you should be able to see two nearby hazards.  ~However, one less obvious hazard is the door.  It will swing shut if you don’t ~chock it open with the bin.  Position yourself slightly away from the door and ~look down (page down button) so that you can see the bottom of the door.  ~Drag the bin icon from the left panel, and place near the bottom of the open ~door (over the grey square mat just inside the door). The bin should then ~appear in front of the door and prevent it from closing.#
6. Watch out.  The door has swung shut.  This is a potential hazard that must ~be fixed immediately.  You will need to place the bin in front of the open door ~to prevent it from accidentally closing.#
7. Unfortunately with the light off it is not safe to continue.  You will need to find ~the light switch and click it with your mouse to turn it on.  There are indeed 3 ~light switches that must be turned on as you progress through this simulation.#